Skip to main content

Oloid Connect - How to Authenticate a User Using Credentials

This document provides step-by-step instructions to authenticate a user using credentials in the Oloid Connect app.

Introduction

The Oloid Connect app supports five authentication methods: Face, QR Code, Badge ID, NFC/ID, and PIN. These methods allow users to authenticate quickly and securely on a paired endpoint.

Prerequisites

Steps to authenticate a user using credentials

Authenticate using any one of the following methods:

Authenticate using Face

This section helps the user authenticate by scanning their face with the device camera.

Prerequisite

  • The user’s face must be registered in the Oloid Connect app.

Steps to Authenticate Using Face

  1. Launch the Oloid Connect App.

    The Welcome screen is displayed.

  2. Tap Login with Face.

    The Camera opens to capture the user's face.

  3. Place your face inside the oval frame in the screen.

    After Successful authentication, the user details displayed at the top of the screen.

Authenticate using QR Code

This section helps the user authenticate by scanning their assigned QR Code with the device camera.

Prerequisite

  • A QR Code must be assigned to the user.

Steps to authenticate using QR Code

  1. Launch the Oloid Connect App.

    The Welcome screen is displayed.

  2. Tap Login with QR code.

    The Camera opens to scan the QR Code.

  3. Place the QR Code within the oval frame on the screen.

    After successful authentication, the user details displayed at the top of the screen.

Authenticate using Badge ID

This section helps the user authenticate by scanning their assigned badge at the badge reader.

Prerequisites

  • A Badge ID must be assigned to the user.

  • The badge reader must be connected to the endpoint.

Steps to Authenticate Using Badge ID

  1. Launch the Oloid Connect App.

    The Welcome screen is displayed.

  2. Tap Login with Badge.

    The Scan Badge at the Reader screen is displayed.

  3. Scan the Badge at the Reader.

    After successful authentication, the user details displayed at the top of the screen.

Authenticate using NFC/ID

This section helps the user authenticate by tapping their NFC tag at the reader.

Prerequisites

  • The user must have an NFC tag assigned to them.

  • The NFC/ID reader must be connected to the endpoint.

Steps to authenticate using NFC/ID

  1. Launch the Oloid Connect App.

    The Welcome screen is displayed.

  2. Tap Login with NFC tag.

    The Tap NFC Tag at the Device screen is displayed.

  3. Tap NFC Tag at the reader.

    After successful authentication, the user details are displayed at the top of the screen.

Authenticate using PIN

This section helps the user authenticate by entering their registered PIN.

Prerequisite

  • A PIN must be set for the user.

Steps to authenticate using PIN

  1. Launch the Oloid Connect App.

    The Welcome screen is displayed.

  2. Tap Login with PIN.

    The Enter PIN to Login screen is displayed.

  3. Enter the PIN.

    After successful authentication, the user details are displayed at the top of the screen.


Keywords

|Oloid Connect authentication | Oloid Connect login methods | Authenticate using Oloid Connect|

Did this answer your question?