Skip to main content
How to configure rf IDEAS readers for NFC tag
Updated over a week ago

Pre-requisite:

To configure your card reader:

  1. Launch the rf IDEAS configuration utility app.

    Make sure the card reader is connected to the system.

  2. Select Connect from the top menu bar.

    The DEVICE LIST is configured and displayed.

  3. Select the preferred configuration from the CONFIGURATION(s) dropdown list.

  4. Select Write from the top menu bar.

    The card reader is updated with the new settings.

  5. Place your cursor in the Test Area and scan your NFC tag with the card reader.

    The NFC tag number is displayed in the Test Area.

    The card reader is configured for the NFC tag.

Did this answer your question?